Valves for Corrosive Service | PFA vs PTFE | How to Choose the Right Material

Do you work with corrosive chemicals or high temperatures? Choosing the right valve material is key to the performance and service life of your process. In this video, we explain the differences between PFA and Teflon (PTFE) and show you Cematic valves lined for corrosive service.

PFA or Teflon (PTFE): Which Should You Choose?

Both materials are fluoropolymers with high chemical resistance, but they have important differences that determine which is right for your process:

Feature PFA Teflon (PTFE)
Chemical concentration ✅ High — HF, conc. H₂SO₄, conc. HCl, ClO₂ Moderate — diluted acids, alkalis
Maximum temperature ✅ Up to 200 °C continuously Up to 180 °C
Chemical permeability ✅ Lower — greater permeation barrier Moderate
Coating flexibility ✅ Higher — better adhesion on complex geometries Lower
Relative cost Higher ✅ Lower
First choice for HF, H₂SO₄ >30%, ClO₂, HCl >20%, strong oxidizers ✅ Diluted acids, moderate alkalis, chlorine

Valve Families for Corrosive Service

PFA-Lined Ball Valve

Available in 2-way and 3-way configurations. The full PFA lining protects all internal surfaces — body, ball, and stem — against the most aggressive acids: HF, concentrated H₂SO₄, concentrated HCl, and ClO₂. The only viable option when the fluid would destroy SS316 in days or weeks.

View PFA corrosion-resistant ball valves →

Teflon-Seated Butterfly Valve

Available in two versions depending on the corrosivity level of the process:

  • SS316 body + PTFE seat + PTFE-coated SS316 disc: For moderately corrosive fluids where additional body resistance is required. SS316 resists diluted acids, chlorides, and industrial process solutions.
  • Carbon steel body with epoxy coating + PTFE seat + PTFE-coated disc: Lower-cost option for corrosive fluids where the body is not in contact with the aggressive fluid — only the seat and disc require chemical resistance.

View butterfly valves for corrosive service →

PFA-Lined Check Valve

Non-return valve for concentrated acid lines. The PFA lining ensures that the corrosive fluid never comes into contact with the metal body. Available in ball version (vertical installation) and swing wafer (horizontal and vertical installation).

View PFA corrosion-resistant check valves →

PFA-Lined Diaphragm Valve

The diaphragm design eliminates the fluid stem — no moving part of the operating mechanism comes into contact with the acid. The EPDM membrane with PFA coating combines the flexibility of EPDM for sealing with the chemical resistance of PFA on the fluid-contact face.

View PFA corrosion-resistant diaphragm valves →

Automation Options

All valves for corrosive service in the Cematic catalog are compatible with automation using:

  • ON/OFF or modulating electric actuator: 24 VDC, 110 VAC, or 220 VAC. For installations without a compressed air network or for direct PLC integration.
  • Single- or double-acting pneumatic actuator: Single-acting NC (fail closed) for hazardous gases and fluids — double-acting for higher torque and frequent cycles.

View automation options →

Not sure which valve you need?

Share your process data with us and we will help you select the right valve free of charge:

  • Fluid and exact concentration (e.g., 35% H₂SO₄)
  • Operating temperature
  • Operating pressure
  • Pipe diameter
  • Required function (isolation, regulation, non-return)

📲 Technical support via WhatsApp →
📞 Tel: +52 55 8288 9378
✉️ ventas@cematic.com