High-Power Double-Acting Pneumatic Piston Actuator | 80–100 mm | Higher Torque in Both Directions

In stock
SKU: PACP080
Regular price $11,567.43 MXN
Extent

High-Power Double-Acting Piston Pneumatic Actuator — Air in Both Chambers, 90°, Diameters 80 and 100 mm, Higher Torque than Single-Acting

Cematic's double-acting piston pneumatic actuator converts the linear motion of the piston into precise 90° rotation using an integral cast crank arm. It is the highest-torque solution in the pneumatic actuator catalog for quarter-turn valves. Unlike the single-acting model, it does not use a return spring — compressed air operates in both chambers of the cylinder, both in opening and closing.

Consequently, it delivers higher net torque throughout the stroke and a faster response in both directions, since there is no spring opposing the movement. Available in diameters of 80 and 100 mm, it is the correct option for large-diameter ball, butterfly, and segmented ball valves.

Therefore, it covers cases where the required torque exceeds the capacity of standard compact actuators. The aluminum body with anti-abrasive treatment also guarantees durability in industrial environments with moisture, dust, and vibration.

Double-acting — why it generates higher torque than single-acting since it operates without a spring in both directions

Double-acting is the correct configuration when the air supply is reliable and the process does not require a defined safety position upon loss of air. The advantages of double-acting over single-acting are described below, since incorrect selection affects torque and process safety:

  • Higher net torque than single-acting — since there is no spring opposing the movement: In single-acting, the spring subtracts force from the piston in the opening direction. In double-acting, likewise, both chambers receive pressurized air, consequently the available torque is higher and more uniform throughout the stroke. With those diameters, the available force is significantly higher than that of standard rack-and-pinion actuator pistons. Therefore, this actuator is the correct option when compact models do not reach the required torque.
  • Uniform torque in opening and closing — since air operates in both chambers equally: The opening torque and closing torque are equivalent, since the same piston diameter acts in both directions. This is especially important in valves with asymmetric opening and closing torques. Its integral cast construction also gives it high resistance to repetitive impacts from each opening and closing cycle without material fatigue.
  • No safety position upon loss of air — since no chamber maintains pressure when the supply is cut: When the air is cut, the piston remains in the last commanded position. It is, therefore, the correct configuration when any valve position is safe in the event of a pneumatic failure, although it is not suitable when fail-close is required. The adjustment is, likewise, quick and simple without special tools.

Double-acting vs. single-acting — when to use each, since the criterion is the safety state upon loss of air

The difference between double and single-acting is the behavior upon loss of the air supply. It is the most important criterion when specifying the actuator, since it defines the safety state of the valve in emergencies:

  • Correct when a defined safety state upon loss of air is required, since the spring acts automatically without a control signal: When the air supply is cut, the spring returns the piston and the valve to the safety position — open or closed depending on the configuration. Consequently, the valve does not remain in an indeterminate position in the event of a pneumatic failure.

Therefore, it is the standard option in emergency shut-off systems where the valve must go to a safe position in the event of any pneumatic supply failure.

  • Not correct when maintaining the position upon loss of air is required, since the spring always acts upon loss of air: If the process requires the valve to remain in the last position upon loss of air, a double-acting actuator must be specified. In that case, single-acting is not suitable.

The single-acting actuator, since the spring acts upon any loss of air, cannot maintain intermediate positions without air supply.

Available torque by diameter — how to select the correct model since it depends on the valve characteristics

The valve operating torque at maximum working pressure must be less than the actuator torque at minimum supply pressure. Therefore, it is always specified with a torque margin of 25-30%. The three available models are described below, since the correct selection of the diameter is decisive for the assembly's operation:

  • 80 mm diameter — for medium-diameter valves that exceed the capacity of compact actuators: It is the lowest-cost model in the series. It is also the correct option when the standard compact actuator does not reach the torque required by the valve.
  • 100 mm diameter — for large-diameter or high-differential pressure valves, since it generates higher torque: It generates higher force than the 80 mm for the same supply pressure. It is the standard option in butterfly and ball valves of larger diameter in industrial services with high differential pressure.

Technical specifications that define the application limits of the piston pneumatic actuator

Parameter Value
Actuator type Linear piston with crank arm — single-acting
Movement 0° to 90° (1/4 turn)
Stroke adjustment ±10° approx. using side stop screws
Available diameters 80 mm / 100 mm
Body material Aluminum with anti-abrasive treatment
Arm material Integral cast
Type of action Double-acting (air in both chambers — opening and closing)
Return spring Not applicable — bidirectional air action
Application High-demand ON/OFF ball, butterfly, and segmented ball valves
Compatible with Solenoid valves, limit switches, positioners

Double-acting vs. single-acting vs. rack-and-pinion — comparison table to select the correct type

Criterion Compact rack-and-pinion Piston with crank arm ← This product
Available torque for the same space Lower — limited by the compact size of the piston, although sufficient for medium diameters ✅ Higher — the large piston generates higher force for the same cylinder diameter
Angular position adjustment ⚠️ Limited or not available in standard models ✅ ±10° using stop screws — field adjustment without special tools
Robustness of the transmission mechanism ✅ Suitable for standard services ✅ Higher — integral cast arm resists high-energy repetitive impacts
Size and weight ✅ Compact — for reduced spaces Higher — justified, since it covers large-diameter valves where rack-and-pinion is insufficient
Correct application Small and medium-diameter valves where standard torque is sufficient ✅ Large-diameter or high-differential pressure valves where rack-and-pinion is insufficient
Integration with pneumatic accessories ✅ Compatible with solenoid valves and limit switches ✅ Also compatible with solenoid valves, positioners, and limit switches

Main applications of the piston pneumatic actuator where high torque is a requirement

  • Automation of large-diameter valves where standard rack-and-pinion is insufficient: When the torque required by the valve exceeds the capacity of compact actuators, the 100 mm piston is the correct option. The crank arm, additionally, transmits that torque with high mechanical resistance in each opening and closing cycle.
  • Chemical and petrochemical plants where the operating cycle is frequent and the environment is aggressive: The aluminum body with anti-abrasive treatment guarantees durability in environments with corrosive vapors, dust, and temperature. The actuator operates by compressed air, therefore it does not generate heat or electrical signal in the process area.
  • Water systems and effluent treatment where high force is required in large-diameter valves: In 8" to 14" butterfly and ball valves in water or effluent lines, the required torque can exceed the capacity of compact actuators. The 100 mm piston, likewise, covers those cases with sufficient torque margin to operate the valve in its entire pressure range.
  • Power generation and auxiliary services where the cycle is continuous: In power plants, this actuator operates steam valves, thermal oils, and service fluids in continuous opening and closing cycles. Its robust construction guarantees a long useful life in that type of service, since the cast arm is designed to resist repetitive impacts.
  • Integration in skids and packaged equipment where the mounting space is limited: The actuator integrates with solenoid valves, limit switches, and positioners for complete module automation. It is, likewise, compatible with the standard pneumatic accessories in the Cematic catalog, which facilitates the specification of the complete system.

For the complete range of pneumatic actuators, see pneumatic actuator collection →

Technical Data Sheet